Defining Subcircuit Parameters

Discussion in 'Cadence' started by Mark Houlgate, Jul 9, 2003.

  1. Mark Houlgate

    Mark Houlgate Guest

    Hi all,

    I have a design that is quite hierarchical and which uses many
    instances of custom-defined cells. However, I would like to create
    user-defined parameters so that transistor or other subcircuit
    parameters can be locally defined to each instance. If possible,
    these parameters would be set in the standard "edit properties"
    window.

    Any suggestions on how to accomplish this would be appreciated. So
    far, I have found how to add parameters to a symbol view, but I have
    no idea how to associate these parameters with elements within my
    circuit.

    Thanks,
    Mark
     
    Mark Houlgate, Jul 9, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ERROR -- Subcircuit -etc.- is undefined

  2. print subcircuit parameters in hspice OSS/HNL netlist

  3. Define subcircuit in Virtuoso Schematic using SPICE

  4. extract subcircuit parameters from OCEAN?

  5. Netlist names all FETs "subcircuit"

  6. how to run a full spice netlist not the subcircuit in the spectre

  7. Saving subcircuit signals

  8. Analog Environment - Subcircuit degeneration - incorrect node naming

Loading...