Creating Custom Hatch Patterns

Discussion in 'AutoSketch' started by kduah, May 8, 2004.

  1. kduah

    kduah Guest

    Hi

    I've created a hatch pattern, but am having problems seeing it in AutoSketch 7. Originally, it was available, but since I made some changes to it, it is no longer available.

    Any ideas on how to overcome this?

    Thanks...K
     
    kduah, May 8, 2004
    #1
  2. kduah

    Paul Jackson Guest

    Did you put it in the Properties directory. Also, what were the changed to,
    the hatch or AutoSketch settings.

    Paul


    AutoSketch 7. Originally, it was available, but since I made some changes
    to it, it is no longer available.
     
    Paul Jackson, May 9, 2004
    #2
  3. kduah

    Harvey Guest

    You can try going to Tools>GraphicOptions and change the Hatch Scale Factor to a
    smaller number (if the hatch is not apparent) or a larger one (if the hatch is all
    black).

    I remember seeing all the hatches as total black, then I changed the Scale Factor
    to 100 and there they were.

    Diddle with that one.

    H
     
    Harvey, May 9, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.