Convert LWPOLYLINE circle to normal line circle

Discussion in 'AutoCAD' started by pyching, Aug 4, 2003.

  1. pyching

    pyching Guest

    Hi,
    Anyone can help me?
    I've groups of circle in different size which are a polyline circle.
    I need to convert it to normal cicle line to allow me to use osnap to quadrant in my measurement of distant btw circles.
     
    pyching, Aug 4, 2003
    #1
  2. pyching

    pyching Guest

    Hi,
    Thanks for helping.

    I still cannot snap-onto any circle as my osnap is set to Center & Quadrant.
     
    pyching, Aug 5, 2003
    #2
  3. pyching

    pyching Guest

    The list command stated as shown below:
    Command: _list
    Select objects: 1 found

    Select objects:
                      LWPOLYLINE Layer: "BCB2"
                                Space: Model space
                       Handle = 5D
                Closed
        Constant width 0.000
                  area 0.012
             perimeter 0.393

    at point X= 1.316 Y= 1.926 Z= 0.000
              at point X= 1.315 Y= 1.932 Z= 0.000
              at point X= 1.314 Y= 1.938 Z= 0.000
              at point X= 1.312 Y= 1.944 Z= 0.000
              at point X= 1.309 Y= 1.949 Z= 0.000
              at point X= 1.306 Y= 1.955 Z= 0.000
              at point X= 1.302 Y= 1.960 Z= 0.000
              at point X= 1.298 Y= 1.964 Z= 0.000
              at point X= 1.294 Y= 1.968 Z= 0.000
              at point X= 1.289 Y= 1.972 Z= 0.000
              at point X= 1.283 Y= 1.975 Z= 0.000
              at point X= 1.278 Y= 1.978 Z= 0.000
              at point X= 1.272 Y= 1.980 Z= 0.000
              at point X= 1.266 Y= 1.981 Z= 0.000
              at point X= 1.260 Y= 1.982 Z= 0.000
     
    pyching, Aug 13, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.