Consistent units throughout assembly.

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by solid3ddesigns, Sep 8, 2004.

  1. solid3ddesigns

    solid3ddesigns Guest

    Is there a method to make all the components in an assembly have
    consistent units. I have hundreds of components in the top level
    assembly, some are native ProE components, others are STEP imports.
    It looks like you can change the units for each component by selecting
    the EDIT menu, and then selecting SETUP, and then UNITS, but I
    deffinitely don't want to do this for every single component !!

    Some of the "STEP" import components are burried deep in the browser
    tree for some unknown reason. Any ideas why an imported assembly
    creates a browser tree with "_NONE" prefexed in the filename ??

    Thanks in advance,

    HB
     
    solid3ddesigns, Sep 8, 2004
    #1
  2. solid3ddesigns

    dakeb Guest

    Applications/Mechanica/Convert
     
    dakeb, Sep 8, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SI Units, Imperial Units, and why the two don't mix?

  2. Chip Assembly and Pad Assembly in ICC???

  3. Exploding sub-assembly in a assembly

  4. Assembly and Sub-Assembly BOM

  5. Exporting Assembly using assembly coordinate

  6. Drawing Units vs Part Units

  7. Design table generated assembly does not stick to its table parameters inside another assembly

  8. Real to drawing units (architectural units)

Loading...