Cat Part In Pro/E

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by UTE, Jul 7, 2004.

  1. UTE

    UTE Guest

    It is possible to read CatPart of Catia into Pro/E or Wildfire ??

    Thanks in advance!
     
    UTE, Jul 7, 2004
    #1
  2. UTE

    David Janes Guest

    : It is possible to read CatPart of Catia into Pro/E or Wildfire ??
    :
    Pro/e imports and exports Catia files in a couple different ways, from what I can
    tell from the Help files. There's a lot of information under Data Exchange. The
    direct way, though, requires an extra license, CAT II with ATB. There are also
    some config options governing how it works, so it probably requires some setup.
    Your question seemed to be fairly particular, about a certain type of Catia file
    which I don't see in the Help files. There's enough material there that it's worth
    a read to see what you can glean.

    David Janes
     
    David Janes, Jul 7, 2004
    #2
  3. UTE

    David Janes Guest

    : CatPart is a CATIA v5 format. ProE Wildfire 2.0 opens these files directly
    : with the CATIA V5 import module.
    :
    Is this an add on module/license?
     
    David Janes, Jul 9, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New Part could use mating part as background

  2. Need help with inserting a part into a new part

  3. Assembly part number vs. Detail part number

  4. Copy Paste Surface from one part to a new part

  5. Translate and Rotate Part in Part problem in SW2003

  6. How can I delete this external reference (mirrored part using plane of another part)

  7. Anyone got Catia? Need help to convert a few Cat ia drawing files to PDF

Loading...