Can't plot from modelspace

Discussion in 'AutoCAD' started by Shirley_Decker, Mar 16, 2005.

  1. Shirley_Decker

    Shirley_Decker Guest

    Since the Installation of AutoCAD 2005, one of our machines will only plot from paperspace. All others are fine. It runs through the plot and says everything is ok, but no plot comes out. I'm using an hp1050c. It works ok on the lazer printer but the hp is a no go. Any ideas? Thanks
     
    Shirley_Decker, Mar 16, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Setting modelspace background color

  2. Modelspace viewport count by activex ...

  3. Can't plot phase noise from pnoise result window in SpectreRF

  4. Moving objects from paperspace into modelspace

  5. Map 3D - can't plot from Model Space

  6. Can't Plot, only Publish from 2005

  7. Application hang plotting display from modelspace

  8. GOING FROM PAPERSPACE TO MODELSPACE

Loading...