Can anyone reccomend a book -

Status
Not open for further replies.

Sime.

Usenet Archive
Joined
Dec 4, 2001
Messages
2
Reaction score
0
That would be a good introduction to ProE.
I am a total newbie to ProE but do have experience of AutoCad.

Any suggestions??
 
I am about to upgrade my PC workstation & am wondering with the speed new Pentium 4 processor & EIDE hard drives, is it necessecary to still use a Scusi built box ? The specs of the machine I am looking at is below

Dell 8200 GHz
Intel pentium 4 Processor 2.0 GHz
384MB Dual channel memory (RDRAM) - i can spec higher.
100GB Ultra ATA (7200rpm Hard Drive) EIDE
64MB nVidia GeForce3 Graphics card - is this good enough for Pro-e. & the rest of the usual CDR, DVD, Sound Card etc. I can spec it with an ethernet card for the Flexlm License. Windows platform is Windows XP

Barry.
 
"Sime." wrote in

That would be a good introduction to ProE.
I am a total newbie to ProE but do have experience of AutoCad.

Any suggestions??
I would like to recommend a couple of books. If you like a more textbook style book (but still has some tutorial-like exercises), try looking up Roger Toogood on www.sdc.com. If you like 100% tutorial style, try Steve Smith's Basic book at www.cadquest.com. I can answer any questions about the material (I used to instruct for him), and he'll answer any questions before and after the sale. There may be other texts, but these two are tried-and-true.

Dave
 
Check out Author Steven G. Smith on the Amazon.com website. He has at least 3 to 4 bookson the subject.
Barry.

"Sime." wrote:

That would be a good introduction to ProE.
I am a total newbie to ProE but do have experience of AutoCad.

Any suggestions??
 
I am a total newbie to ProE but do have experience of AutoCad.

Any suggestions??

If you're just starting, try 'Zen and the Art of Pro/E design'. I'm not sure if anyone's written it yet though.

Alan
 
"Barry Lyons" wrote in

I am about to upgrade my PC workstation & am wondering with the speed new Pentium 4 processor & EIDE hard drives, is it necessecary to still use a Scusi built box ?

The EIDE vs. SCSI argument hasn't changed much. Yes, IDE drives are a whole lot closer to SCSI than they used to be, but SCSI undoubtedly wins every time (and yes, I've owned both). For Pro/E use, it's not a very important difference. SCSI speed can help when you overload your RAM and are digging in the hole 'o swap, and it's nice when saving/opening large assemblies. That said, though, 1.5GB of RAM is more affordable than the jump to SCSI (makes the swap argument go away), and regenerating the assembly is still slower than the retrieve from disk. I'd say the SCSI thing mostly depends on whether you need it for other reasons.

The specs of the machine I am looking at is below

Dell 8200 GHz
Intel pentium 4 Processor 2.0 GHz
384MB Dual channel memory (RDRAM) - i can spec higher.

You could, but then again, you could also go on pricewatch.com and probably add 1GB for the price Dell wants to add 256. That's what I'd do. There's no point in a Pro/E hardware upgrade if you aren't going to pile up the RAM.

100GB Ultra ATA (7200rpm Hard Drive) EIDE

Damn that's big. That'll hold a lot of mp3s (I mean assemblies).

64MB nVidia GeForce3 Graphics card - is this good enough for Pro-e.

In a word, yes. Better yet are the FireGLs and Wildcats, but that's a whole other price class. (But worth it if you have another $500-2500 to throw at things).

& the rest of the usual CDR, DVD, Sound Card etc.
I can spec it with an ethernet card for the Flexlm License.

Or use your old network card (unless it's ISA). You could possibly reprogram the MAC address to match the old one, depending on which new card you get. Just make sure to throw out the old one in that case. (two identical MACs on any one network, i.e. LAN or Internet is like two trains on the same track)

Windows platform is Windows XP

You _may_ find some compatibility issues with XP Pro that you wouldn't with 2000. I'm not saying to skip it, but you'll be a bit ahead of the crowd in this one. I'd do it, but I also have little fear of the occasional bug and driver upgrades.

 
Status
Not open for further replies.

Latest threads

Back
Top