Boundary standard cell

Discussion in 'Cadence' started by dati_remo, Jun 30, 2004.

  1. dati_remo

    dati_remo Guest

    I can't change the boundary dimension (the blue rectangle) of a
    standard cell after its creation.

    What is the method in LayoutXL to do it?

    Thanks
     
    dati_remo, Jun 30, 2004
    #1
  2. dati_remo

    S. Badel Guest

    The boundary is not blue for everybody, so you better
    state the 'rectangle on the such layer' rather
    than the 'blue rectangle'. anyway.

    My guess is that your prBoundary layer is not 'valid'
    so just do in LSW 'Choose Valid Layers', then search for
    this layer and check it. It will appear in LSW and you'll
    be able to change it.

    You can also make all layers valid if you do not know which
    layer it is.

    Hope this helps,
    stéphane
     
    S. Badel, Jun 30, 2004
    #2
  3. dati_remo

    dati_remo Guest

    Thanks to all.




     
    dati_remo, Jul 20, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cell Layout creation from Standard Cells

  2. Using a new standard cell library with Synopsys Design Analyser

  3. Need help in linear scaling of standard cell layout from 130nm to 90mn

  4. Problems with OSU Standard Cell Libraries and importing encountergenerated .v netlist

  5. reg: Standard I/O cell ?

  6. Place all the cells of the library (like standard cell lib) in asingle layout window

  7. custom digital placer placing blocks of 2 standard cell height alongwith normal std cells

  8. Bentley View: accessing cell libraries (*.cell, *.cdx)

Loading...