Autosketch SKD drawings to dxf

Discussion in 'AutoCAD' started by John O'Sullivan, Dec 28, 2005.

  1. John O'Sullivan

    John O'Sullivan Guest

    I feel a bit back in the steam age here but I used Autosketch in the
    early 90's and have a drawing in skd format which I would like to bring
    into AutoCAD. Normally within Autosketch, there is a conversion to dxf.
    However the drawing was made in (I think) version 3 of Autosketch and my
    version 2 Autosketch will not open it.
    Is there anyone out there who can convert the Autosketch skd file to dxf?
     
    John O'Sullivan, Dec 28, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Manipulate the element in the DXF from MicroStation, durin DXF are still DXF

  2. Multiple Sheet Drawings vs. Single Sheet Drawings

  3. Printing set of .dxf drawings

  4. save as .dxf or convert .sldprt to .dxf

  5. Converting 2-D DXF to 2-D DXF possible?

  6. AutoSketch 9 - Support AutoCAD 2004/2005 Drawings?

  7. Converting .skd to .pdf

  8. version 2.1 skd's in version 9

Loading...