Automating the process of Inserting Parts into the Assembly

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Kumarasamy, Apr 18, 2007.

  1. Kumarasamy

    Kumarasamy Guest

    Hi users

    I want to assemble the parts (File names from the Excel Table ) in to
    a Assembly. By keeping all
    the constraints be the same., the next set of parts (are having same
    geometry but varying in length measures) are to be inserted
    automatically.

    How can I automate this process?

    Thanks in Advance.

    Kumarasamy
     
    Kumarasamy, Apr 18, 2007
    #1
  2. Kumarasamy

    roemea Guest

    This is a complex problem, but can be done with a combination of
    family tables, interchange assemblies, and then all tied together with
    Pro/Program.
    This book is a good starting point. Automating Design in Pro/ENGINEER
    with Pro/PROGRAM
    http://www.amazon.com/Automating-De...0002461?ie=UTF8&s=books&qid=1176907168&sr=8-1


    Good luck,
    Andy
     
    roemea, Apr 18, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Automating the Simulation Process.

  2. Is it possible to explode configs into seperate parts - without breaking assembly?

  3. Inserting TB parts

  4. Copy the same part into assembly, then edit, then save derived parts??

  5. How to include parts of main-assembly in drawings of sub-assembly?

  6. In-process or Out-of-process?

  7. process in Plotter, or process in Computer?

  8. New to Inventor and want to move parts from sub-assy into top level assy and retain the constraints

Loading...