Autodraw for survey coordinates

Status
Not open for further replies.

Laynne Botes

Usenet Archive
Joined
Nov 19, 2001
Messages
3
Reaction score
0
Is there a macro or mdl that can draw a smartline by ascii file coordinates import automatically. I have searched & tried several macros & mdl's but none of them gives the results I want.

It is a typical cxyz-format that surveyors use.

Even a suggestion is better than nothing to work with.

LB
 
Hi Laynne,
You could try XYZ Text: select Tools > Tool Boxes, XYZ Text. Take a look at the "down arrow" tool. This function is in MicroStation/J, perhaps SE and V8 as well. Happy New Year, Simon

Laynne Botes wrote:
Is there a macro or mdl that can draw a smartline by ascii file coordinates import automatically. I have searched & tried several macros & mdl's but none of them gives the results I want.

It is a typical cxyz-format that surveyors use.

Even a suggestion is better than nothing to work with.

LB
 
"Laynne Botes" wrote:
Is there a macro or mdl that can draw a smartline by ascii file coordinates import automatically. I have searched & tried several macros & mdl's but none of them gives the results I want.

It is a typical cxyz-format that surveyors use.

Even a suggestion is better than nothing to work with.

LB

There is also an MDL out there called CVTDATA.MA, written by Bill Steinbock.

Visit http://www.geocities.com/caddcop/PI_frame.htm and follow the MDL links to the page for cvtdata.ma and then follow its link to download the source and compiled mdl.

You may also find a few others there very usefull - PLTPNT.MA, EXTPNT.MA, PNTDATA.MA, SCALE.MA, and CIVTOOLS.MA. Unfortunately, they are not available for v8 at this time - except for an early conversion of civtools.
 
Layne,
Have a look at Geoscript (that is part of GeoGraphics). That is a scripting tool esspecially build for geoengineering users that (hardly) doesn't have any programming experience and do not want spend money on consultancy. If you have GeoGraphics Select you can download it from SelectServices (look for the product GeoSELECTools). The whole code of the example looks like this:

DEFINE ASCII_FORMAT point_file
SKIP 0
COMMENT ';'
BLOCK 1
SEPARATOR ','

ASSIGN number S SEPARATOR 1
ASSIGN X R SEPARATOR 2
ASSIGN Y R SEPARATOR 3
ASSIGN CODE S SEPARATOR 4
END

DEFINE SCRIPT load_points
setup none

validate
IF (CODE=='1') // Code for a new line
xstart = x
ystart = y
ELSE
place line xstart ystart x y
xstart = x
ystart = y
END
END
END

BROWSE INPUT filename "Select Point file" "*.dat"

xstart = 0
ystart = 0
if (filename"")
ASCII_LOAD filename point_file load_points
end

Laynne Botes wrote:

Is there a macro or mdl that can draw a smartline by ascii file coordinates import automatically. I have searched & tried several macros & mdl's but none of them gives the results I want.

It is a typical cxyz-format that surveyors use.

Even a suggestion is better than nothing to work with.

LB
 
Status
Not open for further replies.

Latest threads

Back
Top