autocad 2004 and OCE TDS 400 problems...

Discussion in 'AutoCAD' started by Howard T., Aug 18, 2004.

  1. Howard T.

    Howard T. Guest

    I'm having troubles with my OCE TDS 400 switching rolls. When my 36" roll
    runs out, it switches to the 30" roll. all settings on my oce tds 400 says
    that it is not to switch. also, when I select properties of my .pc3, under
    the "media source and size" there is no 30" choice....how can I add this to
    the 24/36/48 selections?

    Thanks,
    Howard
     
    Howard T., Aug 18, 2004
    #1
  2. Howard T.

    Heath Tupper Guest

    Do you have an FM service trackign your plotting from the TDS 400?
    If so there might be something in that telling it to automatically switch
    rolls.
     
    Heath Tupper, Aug 19, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. OCE 9600 or TDS 600 Plot Problems

  2. Oce TDS 600 drivers and AutoCAD 2000

  3. Kip 6000 vs. Xerox 510 vs. Oce TDS 600

  4. OCE TDS 400 and Win 2003

  5. xerox 510 or oce' tds 400- must decide asap-

  6. Oce TDS 600 with multiple OS's

  7. Custom Sheets-Font Mirror-OCE TDS 600

  8. OCE TDS 600 paper rotation

Loading...