array points along an element....

Status
Not open for further replies.

redbyrd

Usenet Archive
Joined
Apr 17, 2000
Messages
106
Reaction score
0
Is there a command in MS that will array points equa-distant along a curve? The curve has the equation (x squared = -40y). So the polar command will not work because the curve is not perfect, I think the delta varies along the curve? Anyway, the only way around this problem is to use the command "Construct point along active element". Unfortunately it only put one point at a time so I must edit the distance each time by adding the distance to the previous one. Fun!

Wish list:
point command that would array a SET OF POINTS along ANY element by distance
 
Hi Red,
If you can live with a cell instead of a point element, you can use the MDL Cell Tools (celltool.ma). I believe it's available from www.cadvision.com/au/utilities.htm. HTH, Simon

redbyrd wrote:
Is there a command in MS that will array points equa-distant along a curve? The curve has the equation (x squared = -40y). So the polar command will not work because the curve is not perfect, I think the delta varies along the curve? Anyway, the only way around this problem is to use the command "Construct point along active element". Unfortunately it only put one point at a time so I must edit the distance each time by adding the distance to the previous one. Fun!

Wish list:
point command that would array a SET OF POINTS along ANY element by distance
 
"redbyrd" wrote:

Is there a command in MS that will array points equa-distant along a curve?

There is the "Construct Points Along Element" command, which will space x points along the element of your choice. The downside, is you don't specify the distance, but the number of points you want spaced along the element.

But combining that command with "Construct Active Point @ Distance Along Element" will let you set a start and end point, between which you can have your equally spaced points, with just a bit of math.
 
You will find what you want under TOOLS-BSPLINE CURVES-MODIFY CURVES. Select the Evaluate Curve tool. In the tool settings window set:
Location(s) input by: Point Array
Number of Points: (whatever number of points you want created along the curve) Compute Following Attributes: Check Points Select the element and accept.

It will construct the number of points you specified along the curve equa-distant.

Hope that helps

Vince

(redbyrd) wrote:
Is there a command in MS that will array points equa-distant along a curve? The curve has the equation (x squared = -40y). So the polar command will not work because the curve is not perfect, I think the delta varies along the curve? Anyway, the only way around this problem is to use the command "Construct point along active element". Unfortunately it only put one point at a time so I must edit the distance each time by adding the distance to the previous one. Fun!

Wish list:
point command that would array a SET OF POINTS along ANY element by distance
 
I guess it would help if I understood the question before posting.

(Vince Rouse) wrote:
You will find what you want under TOOLS-BSPLINE CURVES-MODIFY CURVES. Select the Evaluate Curve tool. In the tool settings window set:
Location(s) input by: Point Array
Number of Points: (whatever number of points you want created along the curve) Compute Following Attributes: Check Points Select the element and accept.

It will construct the number of points you specified along the curve equa-distant.

Hope that helps
...
 
Vince,

Take a look at PLAPTS.MA on my web-site; I think it
does what you are asking. If you have questions, drop
me a line:

http://home.attbi.com/~hksys/

Yours,

Geoff Houck

Vince Rouse wrote:
I guess it would help if I understood the question before posting.

(Vince Rouse) wrote:
> You will find what you want under TOOLS-BSPLINE CURVES-MODIFY CURVES.
> Select the Evaluate Curve tool. In the tool settings window set:
> Location(s) input by: Point Array
> Number of Points: (whatever number of points you want created along
> the curve)
> Compute Following Attributes: Check Points
> Select the element and accept.
>
> It will construct the number of points you specified along the curve ...
 
Status
Not open for further replies.

Latest threads

Back
Top