AMD Processor support?

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by meld_b, Jul 26, 2003.

  1. meld_b

    meld_b Guest

    I'm looking to build a system that may someday run Pro/E... I see that
    AMD isn't on PTC's website under Platform support. Does this mean I
    should stay on the Intel side of the world?

    What does "de-certified" really mean on the graphics cards? PTC found an
    issue, or what?

    -Dan
     
    meld_b, Jul 26, 2003
    #1
  2. meld_b

    David Geesaman Guest

    No. If a CPU runs windows, it runs Pro/E. Certification means very
    little - except that PTC will become involved with troubleshooting (aka
    blaming the manufacturer) when a bug is found.
    It's old.
    If you search this group's archives at
    http://groups.google.com/advanced_group_search you can find what low cost
    cards run Pro/E well. I suggest nVidia.
     
    David Geesaman, Jul 28, 2003
    #2
  3. meld_b

    meld_b Guest

    Thanks! The hotline said essentially the same thing... although they
    have to say "It will probably run - but we can't support you if you have
    a problem"

    Neat to know about this group search... Although it really has to be
    reined-in to keep it from telling me about Sun Creator 3D graphics cards
    and 8M $300 cards from yesteryear.

    -Dan
     
    meld_b, Jul 30, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. AUTOCAD 2000 on an AMD 64 bit machine?

  2. AMD 64 Bit processor

  3. Wierd message (AMD Newbie)

  4. Good results with HP ZV5255 AMD Athlon XP based notebook

  5. What is the Best Processor for SolidWorks AMD 64fx, Xeon, P4?

  6. Amd dual processor any good for Solidworks with Pdmworks?

  7. Problems Installing SW on a new AMD System

  8. AMD Vs Intel : 7-0

Loading...