ACIS error 61006

Hi,
I try to draw in 3D but where I open my file, I have this error :
Missing double in restore file
ACIS error 61006
What must I do ?
Thank you

 

for 3D modeling use a real 3D program:
http://www.cadsoft-solutions.com/

N.

 

I guess you're working with ACAD Rel. 14?
If so, you need the bugfix (patch) "satfixer.arx".
Goto
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=2523543&linkID=2475161
and follow the instructions.

Juergen

 

You are working with a non-English OS, and an English release of AutoCAD 14.
Correct?

You must install SATFIXER, as mentioned above.
You can try to restore the drawings that were damaged. Sometimes this works,
but unfortunately not every time. Satfixer will protect you in the future.

Best of luck.

G Faris

 

Thank you... I do that and it 's ok for a short time... Because now, I have
again the problem (when I open a drawing, I have ACIS error 61006 and I have
only a part of my drawing)... And when I load "satfixer.arx" and
recoveracis, Autocad gives me this message :

*** ACIS data recovery failed. The current drawing has been discarded.
If the ACIS error message, "Missing double in restore file.",
was issued immediately after the RECOVERACIS command started, then
the original file was probably valid and it does not need recovery.
Otherwise, the drawing contains ACIS-based entities for which the
ACIS data has been lost and recovery is not possible from that version
of the file. Please try recovery on a backup of the file.
_.NEW Really want to discard all changes to drawing? <N> _Y Enter template
file
(or . for none) <C:\Program Files\AutoCAD R14\template\acadiso.dwt>:
AutoCAD bonus utilities loaded.
Regenerating drawing.

In the explanation of satfixer, I saw it's the ase.arx's version who gives
me problem... What I can do now ?