Acess to the internet

Discussion in 'SolidWorks' started by I did it, Dec 15, 2003.

  1. I did it

    I did it Guest

    I just installed SWX2004 SP0 & when I start the program it asks 2 questions
    through my Zone Alarm.
    What does this mean? Can I turn it off?

    Thank you
     
    I did it, Dec 15, 2003
    #1
  2. I did it

    MM Guest

    Under "tools-options" uncheck "enable performance email"

    Regards


    Mark
     
    MM, Dec 15, 2003
    #2
  3. I did it

    comb Guest

    Thank you for your help. I tried your suggestions but still trying to
    connect to the Internet when I opened SWX.
     
    comb, Dec 15, 2003
    #3
  4. I did it

    Corey Scheich Guest

    Do you have SW checking for SPs?

     
    Corey Scheich, Dec 15, 2003
    #4
  5. I did it

    comb Guest

    I don't know. How do you check that?

     
    comb, Dec 15, 2003
    #5
  6. I did it

    Corey Scheich Guest

    Help>Service Packs.....
    Dialoge box has a check mart to atuomatically check for SPs
     
    Corey Scheich, Dec 15, 2003
    #6
  7. I did it

    d Guest

    I'd reccomend checking the IP. My guess: it's 127.0.0.1. That's an
    internal IP used for network testing. If that is not the IP that ZA is
    reporting, please specify what it actually is.

    Hope this helps.....
     
    d, Dec 15, 2003
    #7
  8. I did it

    comb Guest

    Thanks for your help...

    You are correct, IP 127.0.0.1 is for the question "Do you want
    SldWorks to access the Internet?"

    The IP for the 2nd question is 0.0.0.0. How can I change them and not
    get the questions again?
     
    comb, Dec 16, 2003
    #8
  9. I did it

    d Guest

    Not sure about the exact procedure, but there should be a setting in
    ZA for SolidWorks application that will allow it to access specific
    ports or IP address. Check your ZA documentation.

    Good luck.......
     
    d, Dec 16, 2003
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. operating AutoLISP over the internet

  2. Microstation via Internet

  3. Intralink 3.3, Internet trouble!

  4. Anybody Else Notice 2005 wants to contact the Internet??

  5. accessing part files via the internet

  6. Check your voicemail over the internet using your own PC

  7. vba code to copy "idrop-schema.xdr" from the internet to a local directory

  8. Millionaire at 31 ... on the Internet! Listen to how he is doing it.

Loading...