Accessing Pro/E through Router / Firewall?

Status
Not open for further replies.

Steve Olivieri

Usenet Archive
Joined
Dec 27, 2001
Messages
6
Reaction score
0
Hi all,

I've searched the newsgroups and seen that some folks are accessing a Pro/E license through a router / firewall.

My friend just bought a LinkSyS 4 port router/swithc for his cable modem. Has both computers hooked up to the Internet. Each computer has a floating license of Pro/E.

If he turns on DMZ, I can see one of the computers (and can access one license of Pro/E). However, when we try using IP forwarding Pro/E tells me that the license server daemon is not running. Therefore, I can't see either Pro/E license. We've tried port 7789 for FlexLM as well (in an effort to differentiate each machine).

Do folks know if FlexLM is looking for only one port, or is it actually using another port in addition to the one that you're specifying in the license.dat file?

I see that others have done this successfully, but unfortunately, detailed "how to" was not listed (ex: what did you put in the license.dat file, etc.).

If someone is successfully access a Pro/E license through a router, could you help us out?

Thanks so much for any help.
Steve O.
 
Thanks to Ryan S. (a fellow Pro/E user) for supplying the answer. Here goes for anyone ever attempting to do this in the future.............

First, you have to open the flexlm server port (ex: 7788) through the firewall. We used IP Forwarding through the router/firewall to point to each of our servers (see below). Second, you have to open a port for the ptc_d (the daemon). You find this port number in the ptclmgrd.log file (located under the flexlm/licensing directory). The port varies per machine, so you have to read this text file. The ptc_d line is towards the bottom. One of ours reads like this (minus the quotes):

"20:33:09 (lmgrd) ptc_d using TCP-port 1043"

We have two servers running Flexlm.
a) Computer number one's flexlm server is on port 7788 (default Pro/E port). Inside the company, we IP forward ports 7788 and the ptc_d port number to this computer's internal ip address. b) Computer number two's flexlm server is on port 7789 (you simply change the server line from 7788 to 7789 in your license.dat file....shutdown the server and restart). Inside the company, we IP forward ports 7789 and the ptc_d port number to this computer's internal ip address.

Works like a charm !!!!!
Thanks, Ryan S. !!!!

Hope this helps future users................
Regards,
Steve O.

"Steve Olivieri" wrote:

Hi all,

I've searched the newsgroups and seen that some folks are accessing a
Pro/E
license through a router / firewall.

My friend just bought a LinkSyS 4 port router/swithc for his cable modem. Has both computers hooked up to the Internet. Each computer has a
floating
license of Pro/E.

If he turns on DMZ, I can see one of the computers (and can access one license of Pro/E). However, when we try using IP forwarding Pro/E tells
me
that the license server daemon is not running. Therefore, I can't see either Pro/E license. We've tried port 7789 for FlexLM as well (in an effort to differentiate each machine).

Do folks know if FlexLM is looking for only one port, or is it actually using another port in addition to the one that you're specifying in the license.dat file?

I see that others have done this successfully, but unfortunately, detailed "how to" was not listed (ex: what did you put in the license.dat file, etc.).

...
 
Status
Not open for further replies.

Latest threads

Back
Top