Acad Like Taffy with Large Drawing

Status
Not open for further replies.

Bo

Usenet Archive
Joined
Jan 18, 2002
Messages
1,259
Reaction score
0
I have a 2.8 M/B Acad2000 drawing where certain functions like snapping to an object and opening a window to have a delay, like 1-2 seconds, this is of course very frustrating. So went out and added 128 M/B of memomry to the existing 64 M/B and it still does it, also have audited, purged and blocked out the drawing as well. Have subsequently checked with another drawing of 3.2 M/B and it works fine, no problems. What could the problem be with this drawing?.
 
What's different about this drawing? Lots of TrueType text? XRefs? Images? There's usually a fairly obvious reason for this kind of behavior.
___

"Bo" wrote:

I have a 2.8 M/B Acad2000 drawing where certain functions like snapping to an object and opening a window to have a delay, like 1-2 seconds, this is of course very frustrating. So went out and added 128 M/B of memomry to the existing 64 M/B and it still does it, also have audited, purged and blocked out the drawing as well. Have subsequently checked with another drawing of 3.2 M/B and it works fine, no problems. What could the problem be with this drawing?.
 
Check to see what kinds of text are being used. Using huge amounts of True Type text is known to cause this problem. If it's the text, you should change the font to an AutoCad font (.SHX)

Gary Lafreni're
CAD Manager
Plan B Retail Design
 
Status
Not open for further replies.

Latest threads

Back
Top