Plot Stamp Log File.....

Howdy,
I have been getting the following error message.
It happens for every plot, the plot still works.
Plotstamp is off.
Using Networked ACAD2004 on WinXP
Al least one other user gets the same problem.
I have been unable to work out how to fix it, perhaps somebody here can enlighten me.
===============================================
Command:
Command: _plot
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Effective plotting area: 288.46 wide by 411.48 high
Effective plotting area: 145.71 wide by 209.21 high

Plotting viewport 2.

Plotting viewport 1.
Error: Cannot append to plot stamp log file.
Temporary plot stamp log file saved to
C:\DOCUME~1\kevint\LOCALS~1\Temp\PlotLog14

Command:
================================================

 

I have encountered this message also. In my case it was caused a result of placing the log file on the network and attempting to use one file for several workstations. If someone else was plotting the log file was open for edit and of course was temporarily read only for the rest of us. Hope this helps - john

 

Check to see that the log file isn't read only. Personally, I hate the log files. Just (in my case) another unnecessary file to contend with. I usually turn it off.